 |
Our Product offerings of our Three-phase Washdown Duty Motors includes our original moisture-shedding “Duck” motor, our Premium stainless and SST stainless line, a line of Paint free “Washguard II” motors as well as our Extreme Duck, encapsulated motors. |
|
| |
| Washguard White Epoxy Features include: |
- Durable RUST-OLEUM White Epoxy Coating
- Stainless steel shaft, conduit box cover, nameplate, fan guard
- Special gaskets, slingers and seals
- Four endshield drains
- Moisture-resistant interior components
- Meets IP55 enclosure protection
- Rigid Base and C-Face models available
|
| |
Ratings:
| Horsepower |
1/3 to 15 |
1/4 to 10 |
1/2 to 1.5 |
| Speed (RPM) |
3600 |
1800 |
1200 |
|
| |
| Premium Stainless Features Include: |
|
- All exterior components of 300 series stainless steel, including motor frame, endshields conduit box, fan guard and fasteners.
- Endshields are 0-ring sealed to frame
- IEEE 841 severe duty features standard
- Meets demanding pharmaceutical requirements, also excellent for chemical-processing applications
- BISSC certified for baking industry
- Meets IP 56 enclosure protection
- C-Face with base and without base models available
- Full fact laser etched nameplate on motor frame
|
Ratings:
| Horsepower |
1/2 to 10 |
1/2 to 10 |
1/2 to 1.5 |
| Speed (RPM) |
3600 |
1800 |
1200 |
|
| |
| SST Stainless Features Include: |
|
- 300-Series stainless steel on all exterior components
- Four quadrant drain locations in each endbell
- Full fact laser etched nameplate on motor frame
- Moisture resistant sealant between frame and endbells to retard water penetration
- Double lip oil seals to protect the double sealed bearings
|
Ratings:C-Face With Base
| Horsepower |
1/3 to 3 |
1/3 to 2 |
1/2 to 1 |
| Speed (RPM) |
3600 |
1800 |
1200 |
|
| |
Ratings:C-Face Less Base
| Horsepower |
1/3 to 2 |
1/2 to 1 |
| Speed (RPM) |
1800 |
1200 |
|
| |
| Encapsulated “Extreme Duck” Stainless Steel Motors, Features Include: |
|
| Mechanical Protection Features: |
- All exterior components are 300-Series stainless steel
- Protech Bearing isolator used for the output shaft seal
- Double Lip Viton shaft seal used on non-drive output shaft on TEFC motors
- Minimal exterior fasteners due to no through-bolt design and screw on conduit box covers reduces surface areas that may trap contaminants
- Double-sealed bearings are pre-lubricated with moisture resistant, high temperature grease for long life
- Rotor/Cartridge, “Q-CAR,” design for quick access to bearings
- O-ring sealed openings on conduit box covers and Rotor/Cartridge cover
- Rigid Cast Base for rugged applications
- Conduit box lead hole location Rota table on TEFC designs
- Full fact nameplate is laser etched to the motor frame making frame surface smooth, which eliminates areas that trap contaminants
- Ease of clean construction is BISSC certified for bakery applications and motors meet Pharmaceutical Duty specifications
|
| Electrical Performance and Protection Features: |
- Motors meet EPACT mandates for non-exempt motors when tested without shaft seals
- Total winding encapsulation using an Epoxy Resin.
- LEESON’s exclusive IRIS™ Inverter-Rated Insulation System provides extra protection and long life, especially when used in applications driven by an Inverter.
|
| Standards and Approvals: |
- Motors are UL component recognized – file number E57948, guide number PRGY2
- CSA Energy Efficiency Verification Program, report number EEV 78720-1
- Construction is CSA Certified for safety, report number LR33543 and listed under BISSC authorization number 769
|
| |
Ratings: Both Rigid Base and C-Face less Base
| Horsepower |
1/2 to 2 |
1/2 to 2 |
| Speed (RPM) |
3600 |
1800 |
|
Lincoln – ODP Multiguard® Encapsulated Motor
Multiguard motors utilize an ODP enclosure with a winding protection system that is unique to the motor industry. The windings are impregnated and encapsulated in a thermosetting, specially formulated polyester based resin using a high pressure injection-molding process. Designed to be used in applications involving moisture, vibration, dust and some chemical action.
Features include:
- Totally encapsulated windings
- Durable Steel Frame and cast iron end brackets
- Premium Class F insulation System
- Continuous Duty at 40º C ambient
- Reduce Voltage start capability
- Made in the U.S.A.
Available Ratings: Rigid Mount - 230/460 Volt
| Horsepower |
30 to 150 |
25 to 250 |
15 to 125 |
| Speed (RPM) |
3600 |
1800 |
1200 |
Available Ratings: Rigid C-Face Mount - 230/460 Volt
| Horsepower |
25 to 250 |
15 to 125 |
| Speed (RPM) |
1800 |
1200 |
Available Ratings: Double C-Face/Double Shaft Mount - 230/460 Volt
| Horsepower |
25 to 250 |
15 to 125 |
| Speed (RPM) |
1800 |
1200 |
Lincoln – Wash-Thru™ Encapsulated Motors
These motors are an exceptional choice for demanding applications such as poultry, seafood, meat and other processing plants. Other applications include areas where a high degree of dust, moisture and vibration exist.
Features include:
- Pressure Encapsulated Technology
- Full length 303 stainless steel shaft
- Laser etched, stainless steel full fact nameplate
- Premium Class F Insulation system
- FDA approved white finish coat
- Made in the U.S.A
Available Ratings: Rigid Mount - 230/460 Volt
Horsepower |
1/2 to 10 |
1/2 to 10 |
1/2 to 7.5 |
Speed (RPM) |
3600 |
1800 |
1200 |
Available Ratings: C-Face with Base - 230/460 Volt
Horsepower |
1/2 to 10 |
1/2 to 10 |
Speed (RPM) |
3600 |
1800 |
Available Ratings: C-Face less Base - 230/460 Volt
Horsepower |
1/2 to 10 |
1/2 to 10 |
Speed (RPM) |
3600 |
1800 |
|
