LEESON Electric Corporation  

Woodworking Motors



Motors are designed for woodworking equipment such as lathes, table saws, planers etc…  Totally enclosed designs prevent motor problems caused by wood dust and shavings.

Ratings: 3450 RPM
Rigid Base ¾- 3 HP 115/230 Volt TEFC Manual Protected 56 - 145T Frame
C-Face Less Base 3 HP 230 Volt TEFC Manual Protected 145TC Frame
Table Saw Motor


Designed for extra high breakdown torque for maximum cutting power. Motor is supplied with an 8-foor cord and 115V plug and also includes an on/off toggle switch. Motor is pre-connected for CW rotation, facing lead-end. This is a direct replacement for Delta motor number 62-042.

1.5 HP TEFC Rigid Base 3450 RPM 115/230 Volt Manual Protected
Contractors’ Saw Motors


These totally enclosed fan cooled (TEFC) motors produce extra high breakdown torques for maximum cutting power. Motors are mounted using a special bracket, so that the motor pivots on rod for belt tensioning. Motor’s shafts are 1-3/4 inches long, ¾ inch diameter with a keyway. Motors include a 54-inch cord. Catalog numbers 120925 and 120997 replace Delta UNISAW® motor 83-621 (1.5HP); 120728 and 120998 replace Delta UNISAW® motor 83-651 (3HP)

1.5- 4 HP TEFC 3450 RPM 115/230 & 230 Volt 143Y - 145Y Frame
Contractor’s Power Tool Motors


Open Drip Proof (ODP) double shaft motors for woodworking applications.  They utilize an electronic starting switch and double sealed ball bearings to prevent failures caused by sawdust accumulation.  Motors are designed for high torques and have reduced amp draw for more overall efficiency.  Shaft extension, each end, with keyway and flat 90° apart for ease of mounting.  Useable shaft, each end is 1.5 inches long by ½ inch diameter on 48 frame and S56 frame models and 1.875 long by 5/8 inches on 56 frame motor.

½ HP 1725 RPM S56Z Frame 115/230 Volt
¾ HP 3450 RPM 48Z Frame 115/230 Volt
1 HP 3450 RPM 56Z Frame 115/230 Volt

Catalog Pages -
Woodworking Motors