LEESON Electric Corporation  

Gear Reducer Modifications

 
Any of the LEESON IRONMAN modified stock gear reducers are available on a quick-shipment basis, factory assembled by the LEESON Gear Mod-Squad™ with no charge for the labor. 
 
Style T or U Base
horizontal base allows the user to mount a basic reducer to floor or machine with a wider footprint and taller output shaft height.
 
Style J Vertical Input Shaft Base
allows user to mount reducer with input shaft in vertical position.
 
Style VL or VH Vertical Output Shaft Base
allows user to mount reducer with output shaft in vertical position (VL = low output shaft height, VH = high output shaft height).
 
Style F Output Flange
allows user to wall or side mount the reducer from its output cover. This cast iron accessory is commonly used for conveyor and mixer installations.
 
Style R Riser Block
adds height to reducer so input flange clears mounting surface. This accessory is commonly used for ceiling mounting arrangements.
 
BM Style Input Flange Kit
allows user to convert a “non-motorized input style” reducer to “motorized coupling input style” in the field to allow C-face motor mounting capability.
 
Double Reduction Adaptor Kits
allows user to create a double reduction unit from two single reduction reducers.
 
Reaction Rod Kit
allows user to mount hollow output shaft reducers.
 
BF Style Output Flange Kit
allows user to wall or side mount the reducer from its output cover. This bent steel accessory is commonly used for conveyor and mixer installations.
 
Hollow Output Shaft Protection Cover
  mounts to the integral output cover side of reducer and covers the unused output bore for single extension or hollow output shaft assemblies.
logo